Description
Product details
Ultimate solution for power factor compensation of unbalanced loads. The compensation is released by measuring the reactive power of the system, through 3 CTs from all 3 phases. This makes it best suited even for most unbalanced loads apart from balanced loads. Features: 1)Incomer TP MCCB / ACB as per rating. 2)Microprocessor-based 3 phase P.F. Controller with RS485 Connectivity Available 3)Inbuilt 3 Phase Energy Analyzer with Data Logger 4)Modular floor mounting system 5)Side/front louvers with Axial Flow/ Centrifugal Fan & Thermostat. 6)Heavy Duty specially designed Capacitor Duty Contactors with high thermal current withstand capacity. 7)MCBs for control protection 8)Auto/Manual selection through Sel. Switch 9)HRC Fuses/MCCB-50kA (optional) for backup protection of capacitor banks. 10)High electrolytic grade EC E91E Aluminium Busbar installed on TP supports. 11)Standard One year warranty . 12)Powder Coated- RAL 7035 / 7032, structure finish/ Matt Finish. 13)Bottom entry system available with the option of the front glass. 14)Available with tuned 7% & 14% 0r any other tuning frequency as per customer request. SPECIFICATIONS: 1)Design:Standardized Modular Sheet Steel Enclosures 2)Enclosure Finish:Epoxy powder coated, in grey (RAL 7305/7032) structure finish/ Matt Finish 3)Internal parts: rust-proof zinc passivated/powder coated 4)Rated Volatge:415V-440V/50Hz (Design available for 380V, 480V, 690V, 750V – 50/60Hz) 5)Other output ratings, switching combination or design voltages are available upon request 6)Capacitors: APP/MPP Super Heavy Duty Series used are rated at 7)525V, 690V and 880V, 50/60Hz as per network voltage 8)Reactor:H-Class insulation ,7%,14% or other Tuning/Detuning rating on request 9)Incoming / Outgoing :MCCB / ACB as Incomer and SFU Fuses for backup protection and MCCB/MCB/ HRC as Outgoing (other combination on request) 10)Ambient Temperature:50 C max short time /40 C average in 24 hours /35 C annual average /-10oC low limit 11)Protection class: IP 40/IP 42 12)Unbalanced Activcomp System: For Unbalanced Activcomp System ratings & specifications – Contact our Sales Office Switchboards are Made and Certified as per IEC 61439-1/2 Following Drawings are provided to the customer before starting the manufacturing of the APFCR panel : General Arrangement Single Line Diagram Bill Of Material General Notes Control Circuits Test : Following Tests can be witnessed by the customer Dimensional Check Bill of Material Verification Functional Checks Powder Coating Thickness Test Relay Function Test(On case to Case basis) Insulation resistance test High Voltage Test 2.5. KV for 1 minute
